MapInfo Pro

Hi
I'm trying to compare 2 elevation based rasters to produce a 3rd raster showing the elevation differences between them.  Can this be done and if so how?
Many thanks

------------------------------
simon

------------------------------

Hi @simon luckett thanks for your question. Yes this calculation can definitely be performed in MapInfo Pro, use the Raster Calculator to subtract one layer from the other and the resulting output is a new raster layer.

Here's an article that describes how to use the Calculator, also there is a section in this video (starting around 1 min mark)​ that walks through the process. Enjoy!

Thanks, Ashley

------------------------------
Ashley Crane
Regional Director, Software Support
Pitney Bowes
------------------------------

Original Message:
Sent: 11-27-2019 12:19
From: simon luckett
Subject: Comparing rasters

Hi
I'm trying to compare 2 elevation based rasters to produce a 3rd raster showing the elevation differences between them.  Can this be done and if so how?
Many thanks

------------------------------
simon

------------------------------

Thank you so much Ashley, very much appreciated
Best regards
Simon

------------------------------
simon luckett
Tarmac Trading Limited.
Chichester
------------------------------

Original Message:
Sent: 11-27-2019 22:47
From: Ashley Crane
Subject: Comparing rasters

Hi @simon luckett thanks for your question. Yes this calculation can definitely be performed in MapInfo Pro, use the Raster Calculator to subtract one layer from the other and the resulting output is a new raster layer.

Here's an article that describes how to use the Calculator, also there is a section in this video (starting around 1 min mark)​ that walks through the process. Enjoy!

Thanks, Ashley

------------------------------
Ashley Crane
Regional Director, Software Support
Pitney Bowes

Original Message:
Sent: 11-27-2019 12:19
From: simon luckett
Subject: Comparing rasters

Hi
I'm trying to compare 2 elevation based rasters to produce a 3rd raster showing the elevation differences between them.  Can this be done and if so how?
Many thanks

------------------------------
simon

------------------------------

Hi Simon,

Another Raster Processing tool of MapInfo Pro Advanced that could be useful is the Volume tool.
This will allow you to calculate the volume difference between the two rasters.

------------------------------
Peter Horsbøll Møller
Pitney Bowes
------------------------------

Original Message:
Sent: 11-27-2019 12:19
From: simon luckett
Subject: Comparing rasters

Hi
I'm trying to compare 2 elevation based rasters to produce a 3rd raster showing the elevation differences between them.  Can this be done and if so how?
Many thanks

------------------------------
simon

------------------------------

Thank you Peter.  I'm due to use the volume tool for the first time shortly so good to know it does exactly what I'm after.
Best regards
Simon

------------------------------
simon luckett
Tarmac Trading Limited.
Chichester
------------------------------

Original Message:
Sent: 11-28-2019 02:02
From: Peter Horsbøll Møller
Subject: Comparing rasters

Hi Simon,

Another Raster Processing tool of MapInfo Pro Advanced that could be useful is the Volume tool.
This will allow you to calculate the volume difference between the two rasters.

------------------------------
Peter Horsbøll Møller
Pitney Bowes

Original Message:
Sent: 11-27-2019 12:19
From: simon luckett
Subject: Comparing rasters

Hi
I'm trying to compare 2 elevation based rasters to produce a 3rd raster showing the elevation differences between them.  Can this be done and if so how?
Many thanks

------------------------------
simon

------------------------------